Up to 0.70 kNm;
6,228 in.lb.

The Jaw-type elastomeric coupling is an economical, proven solution for general purpose applications. Jaw couplings are easy to install and require no lubrication or maintenance. Four different flexible insert types are available: Buna-N rubber, Urethane, Hytrel™ and Bronze. Jaw couplings are an excellent choice for all light and medium duty general purpose industrial applications.

•	No maintenance/lubrication
•	Part-for-part interchangeable with industry standard design
•	Fail-safe design – equipment will continue to drive if elastomer fails
•	Wide range of in-stock inch and metric bore sizes
Typical Applications
•	Pumps
•	Fans/Blowers
•	Electric Motors
•	Compressors

Up to 8.20 kNm;
72,480 in.lb.

Sure-Flex is a TB Wood's original! Sure-Flex Couplings utilize a rubber (EPDM or Neoprene) or Hytrel™ thermoplastic flex element (sleeve) to transmit torque and accommodate shaft misalignments. Sure-Flex couplings have exceptional torsional flexibility, and the
4-way flexing action absorbs virtually all types of shock, vibration, misalignment, and
end float. Sure-flex couplings are an excellent choice when low cost, high flexibility, vibration damping, and easy installation are primary concerns.

•	Easy assembly
•	Spacer, bushed hub, and clamping hub designs in stock
•	Flexible design accommodates misalignment and protects equipment
Typical Applications
•	Pumps
•	Fans/Blowers
•	Electric Motors
•	Compressors
•	Mixers
•	Conveyors

Up to 4.50 kNm;
39,500 in.lb.

Dura-flex couplings "split-in-half" element design allows for easy element installation/ replacement without moving connected equipment or disturbing the shaft connection. Spacer design can accommodate a large range of shaft spacing with few parts. Patented design minimizes bond stress for long coupling life. Highly flexible and able to accommodate shaft misalignment while minimizing vibration and preventing damage to connected equipment.

•	Easy to assemble/replace
•	High Misalignment ratings
•	No maintenance/lubrication
•	Part-for-Part interchangeable with industry standard design
•	In-stock versatile spacer design can accommodate many configurations with few parts
Typical Applications
•	Pumps
•	Fans/Blowers
•	Electric Motors
•	Compressors
•	Conveyors

Up to 96 kNm;
850,000 in.lb.

These pin and bush couplings accept parallel, angular and axial misalignment and can provide considerable torsional flexibility.

•	Vertical or horizontal operation
•	80 or 90 shore hardness close fitting flexible elements
•	Steel or cast iron hubs
•	Brake drum or disc available as well as special designs
Typical Applications
•	Pumps
•	Fans Drives
•	Various Steelworks Drives
•	Twin Screw Extruder Drives
•	Packaging Machinery